Level Probes

  • Suitable for powders, granules and liquids
  • Automatic calibration
  • Power shield compensator
  • Suitable for hazardous areas

Digimatic DML4(A) Self Contained Capacitance Level Probe

Fixed point capacitive level control suitable for detecting liquids, powders & granular solids. Automatic high/low level calibration with full manual override. LED display shows calibration & run mode readings. Power shield compensator, prevents false signalling due to material build-up on probe rod. Available with long or short power shirld, flush probe mounting or with clear viewing lid (display is visible through viewing windows to avoid cover removal. ATEX approved.



Supply 110/230V ac, 24V dc
Load 1.5A max, 50 mA dc
Ambient Temp. -10°C to +50°C
Output SPCO relay rated @ 2.5A 240V ac non-inductive
Output Mode Switch selectable for normally ON (high level),
or normall off (low level)
Calibration Membrane pushbuttons with LED display. Automatic calibration with full manual override
Indicators Digital display for calibration and run mode settings, plus power, timer and output LED's
Mounting 1" BSP
Protection IP65
Compensator Power shield compensates for material build up between probe and vessel wall (earth/ground). Prevents false signalling. Ideal for sticky or viscous materials
Weight DML4(A)W - 2Kg
200mm rod - 0.25Kg
300mm rod - 0.25Kg
1 metre rod - 1.50Kg
2 metre rod - 3.00Kg
10 metre wire rope - 1.75Kg
Approval ATEX 1D Explosive Dust hazard use.
Options/Type Standard: DML4(A)W
Standard unit with non-window Lid: DML4(A)
Short power shield: add 'S' at end - DML4AS
Flush mounting: add 'F' at end - DML4AF
eg:Short power shield with clear lid: DML4ASW
Flush mounting with clear lid: DML4AFW

No matter what service you need, we have a local representative in Australia ready to support you.